دوره VMware NSX 6.4.1 : Install, Configure, Manage

خلاصه دوره VMware NSX 6.4.1 : Install, Configure, Manage:

در دوره آموزش VMware VNX مخاطبان، چگونگي نصب، پيكربندي و مديريت VMware NSX را فرا خواهند گرفت. در حقیقت NSX يك شبکه نرم افزاری و همچنين يك ساختار مجازي سازي امنيتی است كه وظيفه آن ارائه الگو هاي عملياتي يك ماشين مجازي براي شبكه مي باشد. شبكه هاي مجازي با ارائه سرویس ها در لایه های دو تا لإيه هفت مدل مرجع شبكه در نرم افزارها، امكان ساخت و توپولوژي هاي شبكه چند لايه اي پيچيده (Multitier Network) و به صورت برنامه نويسي شده (Provisioned Programmatically) را در کسری از ثانيه فراهم می نماید. اين تكنولوژي همچنين به ارائه يك مدل کارا و ایمن در لایه امنيت شبكه در مرحله اي كه پروفايل هاي امنيتي در پورت هاي مجازي توزيع مي شوند پرداخته و در زیر ساخت مجازي مورد استفاده قرار می گیرند.

مدت دوره:

32 ساعت

پيش نياز:

پیش نیازهای لازم برای شرکت در این دوره:

1- گذراندن دوره VMware vSphere 6.7 : Install, Configure, Manage
2- آشنایی با مفاهیم Routing, Switching, Firewall

اهداف دوره VMware NSX 6.4.1 : Install, Configure, Manage

آشنایی و تسلط بر موارد زیر:

- Describe the evolution of the software-defined data center
- Configure and deploy VMware NSX components for management and control
- Describe basic VMware NSX layer 2 networking
- Configure, deploy, and use logical switch networks
- Configure and deploy VMware NSX distributed router appliances to establish east-west connectivity
- Configure and deploy VMware NSX® Edge™ services gateway appliances to establish north- south Connectivity
- Configure VMware NSX L2 bridging
- Configure and use all main features of the NSX Edge services gateway
- Configure NSX Edge firewall rules to restrict network traffic
- Configure VMware NSX distributed firewall rules to restrict network traffic
- Configure Service Composer policies
- Configure an identity-aware firewall
- Describe VMware NSX data security
- Use the cross-vCenter VMware NSX feature

سرفصل دوره VMware NSX:

1- Course Introduction
- Introductions and course logistics
- Review course objectives
2- Introduction to vSphere Networking
- Describe VMware vSphere® networking components
- Describe vSphere standard switches
- Describe vSphere distributed switches
3- Introduction to NSX
Describe the benefits of NSX
Identify NSX key use cases
4- NSX Architecture
- Describe the NSX architecture
- Describe the cloud management, management, control, and data planes of NSX
- Identify the component interactions
- Describe the VMware NSX® Controller™ cluster and its functions
- Explain the NSX Controller workload distribution
5- NSX Infrastructure Preparation
- Explain the steps required for an NSX installation
- Describe what is involved in planning an NSX deployment
- Describe the NSX Controller cluster and deployment
- Describe NSX Controller cluster high availability and load distribution
- Explain how to deploy and configure the NSX Controller cluster
- Explain the workflow involved in host preparation
6- NSX Logical Switch Networks
- Explain transport zones, VXLANs, and VXLAN tunnel end points (VTEPs)
- Describe the procedure for preparing the infrastructure for virtual networking
- Describe the configuration of vSphere distributed switches for VXLAN
- Identify the components involved in NSX logical switching
- Define VLANs for VXLAN
7- SNSX Logical Routing
- Explain the east-west and north-south routing concepts
- Define the NSX distributed logical router
- Explain the logical router, interfaces, and interface addresses
- Describe the management and control plane interaction
- Describe logical router deployment models and two-tier routing for east-west traffic
- Explain the common topologies of an NSX Edge services gateway
8- Advanced NSX Logical Routing
- Describe how routers connect remote networks
- Explain route redistribution methods
- Describe less-than-or-equal (LE) and greater-than-or-equal (GE) configurations
- Describe routing event notification enhancements
- Configure equal-cost multipath (ECMP) routing
- Describe high availability for NSX Edge service gateways
9- NSX L2 Bridging
- Explain L2 bridging use cases
- Describe software and hardware L2 bridging between VXLAN and VLANs
- Discuss L2 bridging packet flows
10- NSX Edge Services
- Describe the NSX Edge Services
- Explain how Network Address Translation (NAT) works
- Explain NAT64
- Explain the function of load balancing
- Explain one-armed and inline load-balancing architectures
- Explain the DHCP and DNS services for NSX Edge
11- NSX Edge VPN Services
- Describe the NSX Edge VPN services
- Describe the VPN use cases
- Configure a L2 VPN on an NSX Edge instance
- Configure an NSX Edge instance for IPsec VPN services
- Explain NSX Edge SSL VPN-Plus services
- Configure NSX Edge SSL VPN-Plus server settings
12- NSX Security Services
- Describe the policy enforcement of the distributed firewall
- Describe virtualization context-awareness
- Explain custom network and security containers
- Describe the architecture of an NSX Edge firewall
- Explain DHCP snooping
- Explain ARP snooping
13- NSX Advanced Security Services
- Describe NSX SpoofGuard
- Identify how tags enable dynamic security service chains
- Explain Service Composer groups, policies, and tags
- Describe the Identity Firewall architecture
- Explain Application Rule Manager
- Explain how to create a monitoring session
14- NSX Introspection Services
- Describe the types of introspection services
- Describe the installation and configuration of Guest and Network Introspection
- Summarize Guest and Network Introspection alarms, events, and audit messages
15- Cross-vCenter NSX
- Describe cross-vCenter features and use cases
- Identify VMware NSX® Manager™ roles and NSX Controller cluster placement
- Deploy universal logical networks
- Explain the design considerations for cross-vCenter NSX

جزئیات سرفصل آموزشی دوره VMware NSX 6.4.1 : Install, Configure, Manage را از طریق لینک زیر دریافت کنید: